Who is Kinkelder
Although Kinkelder is now known for its sawing blades and technology, the company started off in the Netherlands in 1945 to manufacture agricultural spraying equipment. Kinkelder expanded its manufacturing capabilities to start producing High Speed Steel (HSS) circular saw blades that can cut both ferrous metals that contain iron, and non-ferrous metals.
Over the years, Kinkelder has developed its technology and cutting tools to be a specialist in this field. Their knowledge of cutting tubes, bars and sheets in various metals is unrivalled compared to their competitors with its advanced, state of the art saw blades. By optimizing the cutting finish and performance of its saw blades to increase efficiency, Kinkelder is able to help their customers reduce their production cost.
What does Kinkelder offer?
There are two types of saw blades that Kinkelder offer, Tungsten Carbide Tipped (TCT) blades and High Speed Steel (HSS) blades. TCT saw blades have teeth that are coated in tungsten carbide which makes them extremely hard and durable. Depending on their model, these blades can cut through solid steel, steel bars and tubes.
To find out more about circular saw blades, you can read our previous article on “Cutting Metals with CIrcular Saws”.
TCT Circular Saws
1. TCT Flying Cut-Off
Kinkelder offers specialised circular saw blades for use with flying cut-off machines.
|
Single & Twin cut-off without inside scarf TCT circular saw blade for flying cut-off applications on tube mills. |
Single & Twin cut-off with inside scarf PVD coated carbide tipped circular saw blade designed for flying cut-off applications dealing with heavy inside scarf. |
|
Cutting tubes on orbital flying cut-off applications Light cutting geometry for smooth chip evacuation that also reduces vibrations when cutting thin walled tubes (<4mm). |
TCT TUBEMASTER STAINLESS Cutting stainless steel tubes on orbital flying cut-off units Offers high uptime due to a long blade life of up to 3.5 m2, combined with high cutting quality and production output. |
2. TCT Tube
Kinkelder offers TCT Tube saw blades that are meant for high performance cutting of stainless steel tubes.
|
Cutting low tensile tubes on high performance sawing machines Designed to cut tubes with tensile up to 850 N/mm2 on high output / high quality stationary sawing machines. |
TCT CHAMPION TL MULTI Cutting multiple low tensile tubes on high performance sawing machines Specifically suited for Rattunde Twin machines but also for BEWO, RSA, Soco and Sinico machines where multiple tubes are being cut. |
High performance cutting of thin and medium wall drawn tube and high tensile tube on high-end cut-off machines Developed to cut thin walled tubes with tensile strengths up to 1,800 N/mm2. |
|
Cutting steel tubes on high performance automatic sawing machines Most effective on sawing machines with accurate control of chip load and variable feed rate. |
Cutting austenitic stainless steel tubes Dedicated tooth geometry of carbide tips and PVD coated CX 4 saw blade allows for perfect surface finish and burr-free tube ends. |
High performance cutting on high hardness steel for less stable machines Specifically designed to cut thin walled tubes. |
3. TCT Solid
Kinkelder’s TCT Solid circular saw blades can be used for high volume cutting of stainless steel solids.
|
High performance cutting of low and medium strength solid bars Champion SL saw blades combine Cermet with the latest PVD coating technology to extend blade life. |
1-M: Cutting low to medium tensile carbon steel (500 – 900 N/mm2) PVD coated, carbide tipped CX1-M saw blade developed for cutting solid carbon steel (carbon content < 0.60%). |
1-H: Cutting high tensile carbon steel (> 900 N/mm2) and Ø > 35 mm stainless steel PVD coated, carbide tipped CX1-M saw blade developed for cutting high tensile carbon steel (> 900 N/mm2, carbon content ≥ 0.60%). |
|
Cutting Ø ≤ 35 mm stainless steel CX6-S saw blades are carbide tipped and PVD coated for cutting stainless steel solids with a diameter ≤ 35 mm. |
Cutting austenitic stainless steel Ø > 35 mm Designed for cutting austenitic stainless steel bars with a diameter larger than 35mm at very high production rates. |
Cutting low to medium tensile carbon steel (< 750 N/mm2) Cermet tipped, PVD coated saw blade dedicated to cutting solid carbon steel (carbon content < 0.60%) with a low to medium tensile strength up to 750 N/mm2. |
HSS Circular Saws
4. HSS Advanced
To cut harder materials with high cutting speeds, HSS Advanced saw blades are the solution for you.
|
HSS X-TREME 2.0 Cutting high tensile steel tubes & profiles on a very high performance level X-treme 2.0 embodies the best features of both the Fusion and Power saw blades. |
HSS X-TREME NX Thin dedicated PVD coating for cutting stainless steel tubes and profiles Dedicated low friction, thin PVD coating with a very high temperature resistance. |
|
HSS POWER 2.0 Thin kerf and low friction multilayer PVD coating for cutting thin walled tubes & profiles Superior surface finish and low friction multilayer PVD coating ensure low vibration, less burr and reduced risk of tube-end deformation. |
HSS POWER NX Ideal for cutting thin walled (stainless) tubes Special temperature resistant thin PVD coating that allows the blade to be used for extremely demanding applications, like fast cutting of thin walled products. |
|
Low friction for high speed cutting of harder materials Special wear resistant, multilayer PVD coating with a low friction coefficient, very high hardness and very high temperature resistance. |
Ideal for cutting (stainless) steel tubes and sticky materials Also suitable for cutting (thin walled) steel tubes and stainless steel flying cut-off applications. |
5. HSS Standard
Last but not least, Kinkelder’s HSS Standard saw blades are used to cut tubes and solids on manual and (semi-)automatic sawing machines.
|
Cost effective saw blade for thin walled tubes and profiles in (stainless) steel Cost efficient solution for cutting structural and non-alloy tool steel thin walled tubes. |
Reduced cutting time for mild steel tubes and solids Due to the higher oxidation temperature, the TiN coated Solar saw blade allows cutting of materials with high tensile strengths. |
The standard for all structural- and non-alloyed tool steel The Alpha saw blade has a blue Oxide surface layer for a longer blade life compared to the uncoated saw blade. |
If you wish to find out more about Kinkelder Circular Saws, feel free to contact us for a consultation.
